How to Remove a Screw With No Head

When a screw rust then we need unscrew the screw, the screw head is often broken without paying attention or using too much force.so you may find it is difficult to remove a screw with no head.The method of removing the screw is as follows:

Step 1.use a center punch to put a positioning hole.

Step2:Choose a tool to drill

Step3.The tool used requires a left-handed direction to unscrew

Step4:Keep drilling until the shaft to the outside

Step5:Take out the shaft

1. To remove the remaining part of the screw that is broken inside, first, use a center punch to put a positioning hole.

2. Then it's drilling. Choose a smaller drill than the original screw size to avoid damage to the screw thread when drilling.

3. The tool used requires a left-handed direction to unscrew. Note: The right-handed direction tightens the screw, If the direction is reversed, the screw will be broken. so they need to Turn the tool gently. Do not be rough in this step

4. Keep drilling, the shaft will be exposed to the outside for a small amount. At this time, gently use the tool unscrew it out in a left-handed direction.

5. Finally, the whole shaft is smoothly screwed out, that is the remaining screw part, and the screw thread is still intact.

This is also workable when the screws rust and we need to take out.

If you have more questions or need micro screws,sems screws,custom screws,stainless steel screws,captive screws,thumb screws,set screws,weld screws,small screws for your industry,welcome to contact heatscrews.we are a cusom screw manufacturers and bolt manufacturers and supplier.24hours online.If you have other questions,pls see our FAQ for custom screws